- Control Channels: 2 CH (1 fan, 1 lamp)
- Remote Range: 30 meters in open area
- Battery type: 2 X 23A Batteries(Not included)
- Rated frequency: 50Hz – 60Hz
- Rated voltage: 90V – 220
- Optional wide voltage: 100V – 220V
- Load power: fan power 300W, LED lamp power 200W, incandescent lamp power 1000W
- Shell Size:
- Receiver controller: approx. 115 X 52 X 25 mm/4.53 X 2.05 X 0.98 in
- Remote control: approx. 133 X 50 X 18 mm/5.24 X 1.97 X 0.71 in
- Gross Weight: approx. 213 g
- Remote Function:
- Fan: Low/Medium/High/Stop, Timer: 1/2/4/8hours
- Light: On/Off
- 1. Plane to the receiver, not anti loaded so as not to affect the cover and uneven ceiling cover,
- 2. Receiver input and output, input and output of switch wiring is strictly prohibited,
- 3. There is a rope switch and remote control receiver on the wind fan. Please pull the switch of the fan to the top grade, and switch the light switch to the light on state to control it with remote control.
- 4. Please control wiring wire color and the instructions on the connection sleeve.
- 5. When using remote control, please check whether the battery is installed (pay attention to the battery positive and negative pole), handle control keys each press a key indicator light flashing.
- If the fan and lamp are all equipped with switches, please switch the fan to the highest speed and turn off the light bulb before using the remote controller.
- 1 x Receiver Controller
- 1 x Remote Control
- 1 x User Manual