XH-W3002 DC 12V Digital Temperature Controller Thermostat RTH-535138

Price:
$5.09

Free Shipping

Product Features:

  • How to set
  • When connect to power supply, press the UP and DOWN buttons at the same time more than 3 seconds, display show 888
  • If display LLL. means the sensor is fault, need to check the sensor.
  • If displat HHH, means the temperature is above the range
  • P0: Set Start temperature
  • Press the setting button, enter the internal menu, the default display for the P0, and then click the settings button, use up and down buttons to set the starting temperature.
  • P1: set stop temperature
  • Press the setting button, enter the internal menu, the default display for the P0, use up and down button to change to P1, and then press the settings button, use up and down buttons to set the starting temperature
  • P2: Set temperature calibration
  • Press the setting button, enter the internal menu, use up and down buttons to change to P2, press the set button again, use the up and down button to do the calibration.
  • If the detetion temperature is above the actual tempeature of 0.5°C, need to set the calibration temperature is 0.5°C
  • If the detetion temperature is below the actual tempeature of 1°C, need to set the calibration temperature 1°C
  • P3: Set delay start
  • Press the setting button, enter the internal menu, use up and down buttons to change to P3, press the set button again, use the up or down button to set delay time( Minutes )

Product Specifications:

    .ui-table{border-left:1px solid #EDF8FB;border-bottom:1px solid #EDF8FB;margin:10px 0 10px -10px;background:#fff}.ui-table td{border-right:1px solid #EDF8FB;border-top:1px solid #EDF8FB;padding:5px 3px}.ui-table .odd{background:#EDF8FB}

    Color: Shown in the picture
    Input Voltage: DC12V
    Temperature Measurement Range: -50~110℃
    Temperature Control Range: -50~110℃
    Temperature Measurement Precision: ±0.2℃
    Temperature Control Precision: ±0.1℃
    Load Power: 120W(12V)
    Measuring Input: NTC10K 1 meter waterproof probe
    Output: Max 10A
    Installation Hole Distance: 73mm / 2.87"
    Hole Diameter: 4mm / 0.15"
    Size: 60 x 45 x 31mm

Package Contents:

  • 1 x Mini Temperature Controller

How to set When connect to power supply, press the UP and DOWN buttons at the same time more than 3 seconds, display show 888 If display LLL. means the sensor is fault, need to check the sensor. If displat HHH, means the temperature is above the range P0: